Quick Detailer

Add showroom shine to your vehicle in minutes with RIOAUTOHUB premium quick detailer sprays. We stock top rated gloss enhancers and clay lubricants from leading global brands. Perfect for removing light dust, fingerprints, and fresh bird droppings these high lubricity formulas safely lift dirt without scratching while adding a slick, glossy finish. Ideal for car shows, final wipe downs, or as a drying aid after washing.

0 products

No products found
Use fewer filters or remove all

The Ultimate Guide to Quick Detailers & Gloss Sprays

What is a Quick Detailer?

A Quick Detailer (QD) is the most versatile chemical in a detailer's bag. It is a light cleaning spray packed with lubricants and gloss enhancers designed to bridge the gap between full washes. Unlike waterless washes which are for cleaning, a QD is primarily for enhancing. At RIOAUTOHUB we offer formulas that can be used to wipe down a dusty car, lubricate a clay bar, or prime a polishing pad.

How to Choose the Right Quick Detailer

While they all look similar, quick detailers serve different purposes.

  • Standard Gloss Enhancer: Focuses on pure shine. Ideal for car shows or wiping off fingerprints at an event. They evaporate quickly and leave no streaks.
  • Ceramic Detailer: Infused with SiO2 (ceramic) particles. These add a layer of protection and boost the water beading of your existing ceramic coating.
  • Cleaning Detailer: Has slightly more cleaning power. Better for removing bird droppings or heavier dust than a standard gloss spray.

Step-by-Step Usage Guide

The "Mist and Wipe" technique is simple but requires care to avoid scratches.

  1. Assess the Paint: Only use QD on light dust or fingerprints. If the car has sand or heavy road grime, do not use a quick detailer; you need a wash.
  2. Spray: Mist the product lightly onto a single panel.
  3. Wipe: Using a plush microfiber towel folded in fours, gently wipe the dust away in straight lines. Do not apply pressure.
  4. Buff: Flip the towel to a clean, dry side and buff the panel to a high gloss streak free shine.
  5. Drying Aid (Optional): After washing your car, spray QD on the wet paint before drying. This adds lubrication for your drying towel and reduces the risk of swirl marks.

Common Quick Detailer Mistakes to Avoid

  • Using on Dirty Cars: This is the most common mistake. A quick detailer cannot handle mud or grit. Dragging heavy dirt across the paint with just a mist of spray will create swirl marks instantly.
  • Using in Direct Sun: Most QDs contain polymers that can flash dry if sprayed on hot paint, leaving difficult streaks.
  • Over Application: You do not need to soak the panel. A light mist is enough. Too much product just makes it harder to buff off.

Frequently Asked Questions about Quick Detailers

Q: Can I use quick detailer as a clay lubricant?
A: Yes, most standard quick detailers make excellent clay lubricants because they are slippery. However, check the RIOAUTOHUB product description first; some ceramic infused detailers are too expensive or "grabby" to use for claying.

Q: What is the difference between Quick Detailer and Waterless Wash?
A: A Waterless Wash has high cleaning power and is designed to clean a dirty car. A Quick Detailer has low cleaning power and high gloss; it is designed for a clean car that just has a little dust.

Q: Will it strip my wax?
A: No, almost all quick detailers are pH neutral and non abrasive. They are designed to sit on top of your wax or coating, actually extending its life by adding a fresh sacrificial layer of slickness.